How To Remove Rivets? 3 Different Methods

If you know how to remove rivets, then you can easily get rid of them within no time! Rivets are light-gauge permanent metal fasteners. It is usually used to connect thin pieces of metals together to create a strong seal. These rivets are often tough to remove. But if you have the right rivet removal tool, you can remove them without any professional help. In today’s article, we will discuss how to remove metal rivets in detail. Here, I have included three different ways of removing rivets. You can keep on reading further to learn how to remove rivets more in detail.

How To Remove Rivets?

Pop rivets are widely used to join two pieces of thin materials like plastic, aluminum, and so on. They are also used for joining sections of gutters and downspout fittings. Here, I have listed down a few ways for how to remove pop rivets.

1. Removing It By Using Drill Bit
2. Remove It By Using A Hammer And Chisel
3. Remove It By Using Grinder

You can keep on reading further to know how to remove plastic rivets in detail.

Remove Rivets By Using Drill Bit

One of the safest ways to remove rivets from hard surfaces like metals is by using a drill bit. This device can easily separate the shaft from its head. Let us now learn how to remove rivets from metal.

1. First, you have to locate which rivets you want to remove.
2. Then, choose a drill bit that fits in the hole of rivets.
3. Once you have found the correct size, secure it in your drill machine.
4. Now, add a few drops of cutting fluid or lubricant to the end.
5. You can spread this lubricant with your fingers.
6. Place this drill at the center of the rivet.
7. Start drilling the rivet slowly by applying firm pressure.
8. Continue this process till the rivet is completely removed.

Note: Make sure you do not forget to wear safety goggles before you start drilling.

Let us now check out how to remove rivets without a drill.

Remove Rivets By Using A Hammer And Chisel

If you do not have a drill bit, don’t panic! You can use a hammer and chisel instead of this tool. To know how to remove blind rivets, you have to follow these steps.

1. For this method, you must have a chisel and a hammer.
2. Now, locate which rivets you want to remove.
3. Then, place the sharp end of the chisel into the head of the rivet.
4. Grab a hammer and knock it against the wide end of the chisel.
5. You might have to hit multiple times to completely remove the head.
6. When the head of the rivet is removed, place the chisel against the top of the rivet.
7. Again take the hammer and knock it against the wide end of the chisel.
8. Keep doing this step till the rivet is pushed through the surface.

Note: Make sure you hold the chisel very firmly. Otherwise, you will end up hurting or injuring yourself.

Remove Rivets By Using Grinder

Grinders can also be used as rivet removal tool bunnings. But you will need a lot of patience and concentration while wording with a grinder. You can use the following instructions to know how to get rivets out.

1. First, you have to locate which rivets you want to remove.
2. Take a grinder wheel and place it parallel to the surrounding surface.
3. Now, slowly move the grinder to cut the metal rivet head.
4. Once, you remove the rivet head, take a pin and place it on the rivet.
5. Now, use your hammer to knock a dent into the center.
6. You might have to punch a few times to make a deep dent.
7. hen, choose a drill bit that fits in the hole of rivets.
8. Once you have found the correct size, secure it in your drill machine.
9. Now, add a few drops of cutting fluid or lubricant to the end.
10. You can spread this lubricant with your fingers.
11. Place this drill at the center of the rivet.
12. Start drilling the rivet slowly by applying firm pressure.
13. Continue this process till the rivet is completely removed.

There are also some alternative ways for removing rivets from other soft surfaces such as jeans, leather, and so on. You can keep on reading below to know how to remove rivets from fabric.

Click here – How To Remove Acrylic Paint? In 10 Simple Methods

Remove Rivets From Jeans

You can find rivets placed on your jeans pocket corners and waistband seams. Sometimes, it gets damaged and needs to be replaced. Here, I will teach you how to remove rivets from jeans.

1. Place the jeans on a uniform surface.
2. First, you have to locate which rivets you want to remove.
3. Keep the front side of the rivet facing upward.
4. Now, pull the fabric slightly away from the rivet and place a chisel underneath.
5. With a mallet, tap the chisel handle gently.
6. Grab the top side of the rivet with a pair of pliers.
7. Pull the rivet until it separates from the fabric.
8. Continue this process till the rivet is completely removed.
9. You can also use a pair of scissors to take the rivet out of the jeans.

Note: You can also use a drill bit if they do not come away cleanly.

Remove Rivets From Leather

Metal rivets on leather bags and garments give a classy look to them. But removing rivets from leather surfaces is a tough task. You need to remove them without damaging the leather. Here, I will explain how to remove rivets from leather by using pliers.

1. Place the item on a flat, uniform surface.
2. First, you have to locate which rivets you want to remove.
3. Loosen the rivets with the tip of your needle-nosed pliers.
4. Make sure you tug and twist it around gently.
5. This will help to create some space between the metal and leather.
6. Continue this process till the rivet is completely removed.

Note: You can also use the nipper tool to cut the rivet.

You can keep on reading further to know how to remove rivets from wood.

Remove Rivets From Folding Chair

Removing rivets from a folding chair can be a super easy task if you know how to do it properly. Here, I will teach you how to remove rivets from the folding chair.

1. First, you have to locate which rivets you want to remove.
2. Use an awl puncher to make a dent into the head of the rivet.
3. Now, place it tip of an awl punch at the center of the rivet shaft.
4. Then strike downward on the awl punch with a hammer.
5. Then, choose a drill bit that fits in the hole of rivets.
6. Once you have found the correct size, secure it in your drill machine.
7. Now, add a few drops of cutting fluid or lubricant to the end.
8. You can spread this lubricant with your fingers.
9. Place this drill at the center of the rivet.
10. Start drilling the rivet slowly by applying firm pressure.
11. Continue this process till the rivet is completely removed.

Note: Make sure you do not forget to put on the safety goggles.

Remove Rivets From Concrete

While renovating your house, you often notice metal rivets that were installed at the time of construction. You do not need a rivet gun to remove the rivets. For removing them, you need to grinder, electric drill, awl punch, hammer, and nose pliers.

Let us see how to remove rivets in concrete by using these tools.

1. First, you have to locate which rivets you want to remove.
2. Grind the head of the rivet with a grinder.
3. Now, place it tip of an awl punch at the center of the rivet shaft.
4. Then strike downward on the awl punch with a hammer.
5. Then strike it down through the full length of the rivet to create a dent.
6. Now, select a drill that fits into the dent.
7. Place the tip of the drill into this dent.
8. Start drilling the rivet slowly by applying firm pressure.
9. Continue this process till the rivet is completely removed.
10. Pull any remaining pieces of the rivet by using needle-nose pliers.

Note: Make sure you hold the dill in the perpendicular position all the time.

FAQ

How To Remove Rivets From Shower Screen?

To remove rivets from the shower screen, use these instructions.

1. First, you have to locate which rivets you want to remove.
2. Then, choose a drill bit that fits in the hole of rivets.
3. Once you have found the correct size, secure it in your drill machine.
4. Now, add a few drops of cutting fluid or lubricant to the end.
5. You can spread this lubricant with your fingers.
6. Place this drill at the center of the rivet.
7. Start drilling the rivet slowly by applying firm pressure.
8. Continue this process till the rivet is completely removed.

Are Rivets Permanent?

Yes, rivets are permanent mechanical fasteners that support tension loads. It is usually used to connect thin pieces of metals together to create a strong seal.

How To Remove Rivet From Plastic?

You can follow these steps to remove rivets from plastic.

1. For this method, you must have a chisel and a hammer.
2. Now, locate which rivets you want to remove.
3. Then, place the sharp end of the chisel into the head of the rivet.
4. Grab a hammer and knock it against the wide end of the chisel.
5. You might have to hit multiple times to completely remove the head.
6. When the head of the rivet is removed, place the chisel against the top of the rivet.
7. Again take the hammer and knock it against the wide end of the chisel.
8. Keep doing this step till the rivet is pushed through the surface.

How To Remove Rivets From PC Case?

You can remove rivets from pc case by using these steps.

1. First, you have to locate which rivets you want to remove.
2. Then, choose a drill bit that fits in the hole of rivets.
3. Once you have found the correct size, secure it in your drill machine.
4. Now, add a few drops of cutting fluid or lubricant to the end.
5. You can spread this lubricant with your fingers.
6. Place this drill at the center of the rivet.
7. Start drilling the rivet slowly by applying firm pressure.
8. Continue this process till the rivet is completely removed.

How Do You Remove A Rivet Without A Drill?

For stubborn rivets that you can’t drill through, grind off the head of the rivet, then bore through it. You could also use a hammer and chisel to break off the head of the rivet and drive it through the surface if you don’t have a drill.

What Tool Is Used To Remove Rivets?

Find a cold chisel or a similarly blunt-edged tool (a slot-head screwdriver works just fine), place the sharp end of the tool against the rivet head’s edge then hit the other end of the tool with a hammer. Repeat until the rivet head is detached. Usually, the rivet can then be easily removed.

How Do You Remove Rivets Without Power Tools?

For smaller rivets, use a drill bit to drive through the surface. For stubborn rivets that you can’t drill through, grind off the head of the rivet, then bore through it. You could also use a hammer and chisel to break off the head of the rivet and drive it through the surface if you don’t have a drill.

How Do You Remove A Rivet Without Drilling?

Removing Pop Rivets With a Chisel

1. Position the edge of your chisel (or screwdriver) against the edge of the rivet at a shallow angle. …
2. Strike the butt of the chisel sharply with a hammer.
3. Repeat, until the head of the rivet shears away. …
4. Shake or tap the work surface to make the mandrel fall out.

What Are The Methods Of Riveting?

Riveting dies and closing head shapes

1. flat into countersunk.
2. shear riveting.
3. tubular rivet crimped externally.
4. tubular rivet crimped internally

Can You Remove Pop Rivets?

The only way to remove rivets is to essentially destroy them. You do this is by “drilling out” the rivet. You use friction from a drill bit to cut away at the inner wall of the fastener. That way, you separate the shaft from the head.

Conclusion

In the above article, we have studied how to remove rivets in detail. Both old and new rivets can be removed by drilling them with an electric driller. Even a grinder, hammer, and chisel can be used instead of an electric driller. They can be used to cut off the head of the rivet. Needle-nose pliers can be used to remove any leftover pieces of the rivet. But make sure you take proper precautions while handling these devices. You could end up harming yourself if not used properly. As you have learned how to remove rivets, you can remove rivets from any surface.

Click here – How To Remove Self Tanner? 6 Easy Ways

To Know Some Great Stuff Do Visit QuerClubs

To Know Some Great Stuff Do Visit QueryPlex

To Know Some Great Stuff Do Visit SarkariXam

What are the three types of rivets

Do you need a rivet removal tool?